Close Window

Long Range Locator DDD04
  • Introduction:
    DDD04 Long Range King is our the latest model which is upgraded based on DDD03 Ultrasonic Long Range Treasure Locator

    It is an advanced Metal Detector System utilizing advanced FORWARD GAUSS technology that is both an audio and visual detector. This metal detector was first used in the field in 1984 and the FORWARD GAUSS technology that it uses has proven to be (by far) the most successful.
    1. Seven Channels
    2. Channel Selector
    3. Horizontal Distance LED
    4. Horizontal Distance Selector
    5. Vertical Depth LED
    6. Vertical Depth Selector
    7. Jack of
    Antenna
    (Sending) 11.
    Horizontal
    Sensitivity
    Adjuster
    8. Charging
    Plug Socket
    (Transmitter) 12.
    Vertical
    Sensitivity
    Adjuster
    9. On/Off
    Switch 13.
    Horizontal
    Sensitivity
    Indicator
    10. Charging /
    Operating
    Indicator 14.
    Vertical
    Sensitivity
    Indicator


    Features and Functions:
    1. Most common frequencies are Copper, Silver, Gold, P.T, Tin, Jewel, Aluminum Detecting Range: 1000m Detecting Depth: Max. 50m After tracking target, you will have some idea of the identification and the exact pinpoint. The face (front) of the transmitter has Seven LED's (channel indicator lights for Copper, Silver,
      Gold, P.T, Tin, Jewel, Aluminum) across the top; each is labeled for a particular element. The face of the transmitter has 10 LEDs (100m, 200m, 300m, 400m, 500m, 600m, 700m, 800m, 900m, 1000m)
      showing 10 different detecting range. And has one knob for selecting the detecing Range
      Also, the face of the transmitter has 10 LEDs (5m, 10m, 15m, 20m, 25m, 30m, 35m, 40m, 45m, 50m)
      showing 10 different detecting depth. And has one knob for selecting the detecing depth. New function: adjustable sensitivity for horizontal detection and vertical detection New English operating panel The black case is adopted fireproof material
    2. Aluminum alloy Strawbench, English label panel.
    Components:
    1. A black case with aluminum trim, a handle and two locks External Battery Port The Belt Receiver Head Phones Receiving Rods Battery Charger Antenna Marker Flags
    2. Operators Manual

  • Specifications:
    1. Max Detection: 50m Detect Range: 1000m Rechargeable Battery: Continuous working 72 hours Power: 850mA Frequency: 433Mhz+/-150Khz Inner Storage: EEPROM 16k×8Bit Voltage: 9~12VDC Temperature Range: -40¡æ~85¡æ Operating Humidity: 0~95% (non-condensing) Ultrasonic Frequency: 400-3000Mhz+/-150Khz
    2. Package: 1PC/CTN
      Unit size: 45×32×20cm
      Unit Weight: 6kg
      Carton size: 46×35×25cm
      Gross weight: 9kg
    Pictures of Operation:
    1. Put half of antenna (pushing) in the ground
    2. Connect antenna with the machine and put the key in the on/off switch on the transmitter than Turn on the transmitter

    3. Adjust the seven channels to select the detecting target
    4. Turn horizontal distance selector and vertical depth selector to select the detecting range and detecting depth Turn on the belt receiver and connected with the antenna (receiving) rods. You can set the belt receiver on your belt. Please refer to the following picture

      Note All above is ready, please wait for 15 minutes, before starting to detect
    5. Detecting
      When all above preparation is OK and start to detecting. One person take Mark Flag, another on takes the Belt Receiver and Antenna (Receiving) Rods, Move slowly around the Antenna and the transmitter, it is better 2 feet per second. And pay attention how to take the Antenna (Receiving) Rods. Please refer to the following picture

      Walk around the Antenna and the transmitter in a ring.Please refer to the right picture how to walk
      Note
      1. Keep taking the Antenna (Receiving) Rods position and parallel as the above pictures
      2. Must move slowly around the Antenna and the transmitter, it is better 2 feet per second
    6. When the Antenna (Receiving) Rods are crossed, stick one Mark Flag in the ground to mark the cross position
    7. First walk around the Antenna and the transmitter in a ring, semi diameter is about 5-10m, to make sure a point

      Then, walk around the Antenna and the transmitter in a bigger ring, semi diameter is over 5-10m, to make sure another point.

      And the antenna and the transmitter and the two points are in one line, refer to the below picture
    8. Above is first step detecting, and change the Antenna and the transmitter position, and detect again following the above detecting method, to make sure another line.
      The cross of the two lines is the position of the gold. Please refer to the below picture.